Transducer Tip Spacer / Shim
Transducer Tip Spacers or Shims - used on old barrels to help push transducers/rupture disks away from the inner barrel wall.
Note: The melt pressure transducer / transmitter should never stick into the material flow - it should be recessed. This is one of the main reasons for early melt pressure sensor failure.
Note: The melt pressure transducer / transmitter should never stick into the material flow - it should be recessed. This is one of the main reasons for early melt pressure sensor failure.
Caraterísticas:
- Used to seal push Transducer Tip Back from inner barrel wall
- copper
- Precision Machined
- Sizes 0.025" to 0.90"
Transductores, Transmisores,
Instrumentos y Manómetros
de Presión de Fusión
Instrumentos y Manómetros
de Presión de Fusión
